Product name:Heat-resisting Plastic Lubricant EBS
Molecular formula:C38H76N2O2
Molecular weight:593.04
Properties: White powder or fine granules. Insoluble in water and organic solvents under room temperature; powdery product is wet-table at above 80°C and soluble in hot chlorinated hydrocarbon and aromatic hydrocarbon. Relative density 0.98, Melting point 140°C, Flash point 285°C.
Technical indexes:Q-320281HJH003-1996
|
Chroma
|
≤8
|
|
Acid value
|
≤10
|
|
Amine value
|
≤2.5
|
|
Melting point (°C)
|
140°C-146.5°C
|
|
Loss on heat(%)
|
≤0.5
|
|
Fineness(through 200 to 325mesh sieve%)
|
≥30
|
Packing:20kg/bag
Stored in a cool; ventilating place. Avoid flame, sunlight and moisture. Non-hazardous chemicals
1)used as plastic process auxiliary agent for thermoplastic and thermoset plastics. Significantly improve dispersibility and processability.
2) used as antisticking agent of polymer film and sheet material, dosage is 0.5-1%
3) as lubricant , it can work well with other lubricants. It can be used as demolding agent for of ABS,AS, hard PVC, polyformaldehyde, PC,polyurethane &; phenolic resin, dosage is 0.5-1.5%
4) It can work with stabilizer in the formulation of inorganic filling PVC and polyolefine. Moreover, it offers good appetency to pigment and coating, so it can improve the commercial value of products.
5)It can be used as nucleation transparent agent to reduce the nucleation time of polyolefine, polyformaldehyde and polyamide.
6) It also can be used as rubber process aids
7) It can improve the performance of pigment in coating
8) It can be added into polyester and polyamide fiber to improve the resistance to heat and elements. It also can be used as additive of antistatic nylon fiber to reduce the breakage of fiber.
